Return Policy
Shipping Info
Warranty
Privacy Policy
Terms of Service
Cookie Policy
FAQ
Terms of Service

Terms of Use

The following terms and conditions apply to your use of this website. By accessing this website or using our services, you agree to these Terms of Use.

You must have the legal capacity required under the laws applicable to you to use the Services and, where applicable, to enter into a binding purchase contract. If you do not have the required legal capacity, your use of the Services or any purchase must be authorised by a parent or legal guardian where permitted by applicable law.

If you do not agree to these Terms of Use, you must not use this website or the information and services made available through it. Your continued use of the website constitutes acceptance of these Terms of Use.

Nothing in these Terms excludes, restricts or replaces any mandatory rights available to consumers under applicable EU or national law.

Limitation of Liability

To the fullest extent permitted by applicable law, PUCKIPUPPY will not be liable for indirect, incidental, special or consequential damages or losses arising from the use of this website, including loss of income, profits, business opportunities or other economic or commercial losses.

Nothing in these Terms excludes or limits liability where such exclusion or limitation is prohibited by applicable law, including liability for fraud or fraudulent misrepresentation, wilful misconduct, death or personal injury caused by negligence, or any mandatory statutory consumer rights or remedies.

Where applicable law does not permit a particular exclusion or limitation of liability, that exclusion or limitation will apply only to the maximum extent permitted by law.

General Usage Restrictions

All contents of this website, including but not limited to images, illustrations, designs, photographs, video clips, text, icons, reports, written information and other materials appearing on this website or in applications relating to PUCKIPUPPY products or services, are owned by, licensed to, or otherwise lawfully used by PUCKIPUPPY.

We reserve the right to update website content and future product specifications, models, colours, materials and other information at any time.

Such updates will not alter the agreed specifications, price or contractual rights applicable to an order that has already been concluded, except where such a change is permitted by applicable law or agreed with the customer.

You may download, view and print text and graphics from this website for personal, informational and non-commercial purposes, provided that the content is not modified and that all applicable copyright, trademark and other proprietary notices are retained.

Downloading content does not transfer ownership or any other intellectual property right to you.

Unless expressly permitted by PUCKIPUPPY or applicable law, you may not reproduce, distribute, publish, modify, transmit, commercially exploit or otherwise use the contents of this website, in whole or in part, without prior written permission.

Disclaimer

The contents of this website are provided on an “as is” and “as available” basis to the extent permitted by applicable law.

PUCKIPUPPY does not guarantee that the operation of this website will always be uninterrupted, error-free or free from viruses or other harmful components, or that every error or defect will be corrected immediately.

We make reasonable efforts to keep website information accurate and up to date, but we do not guarantee the accuracy, completeness or availability of all website content at all times.

Nothing in this Disclaimer excludes, restricts or replaces any statutory rights or remedies available to consumers under applicable EU or national consumer protection law.

Any commercial warranty provided by PUCKIPUPPY for an e-bike or other product is additional to, and does not replace, restrict or limit, the consumer's statutory legal guarantee of conformity or other mandatory consumer rights.

Where any disclaimer or exclusion contained in these Terms is not permitted under applicable law, it will apply only to the extent legally permitted.

Indemnification

To the extent permitted by applicable law, you may be responsible for reasonable losses, damages, costs or expenses directly resulting from your unlawful use of this website or a material breach of these Terms of Use.

Nothing in this section requires you to compensate PUCKIPUPPY for losses caused by PUCKIPUPPY, its employees, agents or service providers, or for any matter for which liability cannot lawfully be transferred to the consumer.

Nothing in this section limits any mandatory consumer right or remedy available under applicable law.

Third Party Content

Third-party content, products, services or links may appear on or be accessible through our website.

To the extent permitted by applicable law, PUCKIPUPPY is not responsible for third-party content, websites, products or services that are outside our reasonable control.

Any opinions, statements or information provided by third parties are those of the relevant third party and do not necessarily represent the views of PUCKIPUPPY.

Before interacting with a third-party website, product or service, you should review the applicable terms and conditions and privacy policy.

Questions, complaints or claims relating specifically to third-party products or services should normally be directed to the relevant third party, without prejudice to any rights you may have against PUCKIPUPPY under applicable law.

Comments and Submissions

If, at our request or voluntarily, you submit ideas, suggestions, proposals, plans, reviews, comments or other content to PUCKIPUPPY, you confirm that you have the necessary rights to submit that content.

To the extent permitted by applicable law, you grant PUCKIPUPPY a non-exclusive, worldwide and royalty-free right to use, reproduce, edit, translate, publish and display such content for purposes connected with PUCKIPUPPY's business, website, products or services.

Unless otherwise required by applicable law or expressly agreed by PUCKIPUPPY, we are not obliged to treat such submissions as confidential, provide compensation for them, or respond to them.

We reserve the right to remove or restrict content that we reasonably believe violates applicable law, infringes third-party rights, violates these Terms of Use, or is otherwise unlawful or inappropriate.

Your comments and submissions must not infringe any third-party rights, including copyright, trademark, privacy, personality or other intellectual property rights. You must not knowingly provide false or misleading information, use a false email address, or impersonate another person.

You are responsible for the content and accuracy of your submissions.

Any personal data contained in your submissions will be processed in accordance with our Privacy Policy and applicable data protection law.

Purchase

How long will it take for me to receive the electric bike I purchased?

Typical delivery time is 2–10 business days unless another estimated delivery time is displayed at checkout or in the shipping confirmation.

Delivery may take longer during public holidays, high-volume order periods, new product launches, pre-orders, restocks, logistics disruptions, or severe weather. Where possible, the estimated shipping date will be shown on the product page or communicated to you by email. 

Where do we sell and ship?

PUCKIPUPPY EU currently delivers to Germany, France, the Netherlands, Italy, Poland and Spain, subject to product availability and carrier coverage.

Delivery availability, shipping charges and estimated delivery times shown at checkout form part of your order information. 

Are taxes included?

Applicable prices, shipping charges and taxes will be displayed in accordance with applicable law and the information shown at checkout.

For the countries currently supported by PUCKIPUPPY EU, please review the final order amount displayed at checkout before completing your purchase.

Nothing in our policies limits any mandatory consumer rights available under applicable EU or national law. 

Do electric bikes need to be assembled?

Electric bikes arrive partially assembled and require a few additional steps to complete the assembly. Please carefully watch the assembly tutorial or refer to the electric bike user manual for installation instructions. Assembly Tutorial.

How can I track my order?

You can click on "Track" to view your order status.

Can discounts be stacked?

Only one coupon can be used per order, and we do not support coupon stacking. The final interpretation right belongs to PUCKIPUPPY.

Cycling

What is the most suitable electric bike for me?

You can read the electric bike buying guide or use the model comparison to choose the one that is most suitable for you.

Do I need a driver's license to ride an electric bike on the road?

Click here to learn about the regulations related to electric bikes.

How long does the electric bike battery last?

Under normal usage, your battery can last for 3-4 years.

What preparations do I need to make before cycling?

Please carefully read our electric bike user manual before cycling. If necessary, you can also refer to our blog for cycling safety guidelines.

Maintenance and Troubleshooting

How do I maintain an electric bike?

Like any bicycle, electric bikes require regular maintenance to ensure safety and enjoyable riding. For more information on electric bike maintenance and cleaning, click here.

What should I do if the bike doesn't start?

Please check the cables to ensure they are not loose or disconnected. Simply loosen the black spiral wire cover until the quick disconnect plug is exposed, unplug it, and then reconnect it.

Troubleshooting guide.

1. Brake Malfunction
Check if the brake cables are loose or damaged. If not, consider replacing the brake caliper or brake lever and cable.

2. Assist Sensor Malfunction

Step1: Check if the sensor wires are loose or detached. If not, it may indicate a faulty assist sensor. Step2: Disassemble and replace the assist sensor.

3. Walk Assist Mode Error
Turn off and restart the electric bike (if the issue persists, consider replacing the controller).

4. Real-Time Mode Error
Turn off and restart the electric bike (if the issue persists, consider replacing the controller).

5. Low Voltage Error
Step 1: Remove the battery and check if it has sufficient charge. Step 2: Charge the battery. Step 3: If the issue remains after completing the first two steps, it may indicate a faulty motor. Replace the motor.

6. Motor Malfunction
Check if the motor connection wires are loose, detached, or plugged in incorrectly (if not, it may indicate a faulty motor, consider replacing the motor).

7. Twist Throttle Malfunction
Check if the connection wires are loose or detached (if not, it may indicate a faulty twist throttle, replace the twist throttle).

Brake Pad Replacement Guide

Tools Needed: Needle-nose pliers, hex wrench, replacement brake pads.

1. Removing the Brake Pads

a. Prepare the bike for maintenance. Start by turning off the bike and removing the battery.

b. Locate the brake pads. The brake pads are located inside the brake caliper on each wheel (refer to the photo).

c. Begin by removing the brake caliper. Use a hex wrench to remove the two brake caliper bolts from the bike frame (caution: be careful not to lose or misplace the washers inside the brake caliper bolts).

d. Carefully straighten the retaining pin with needle-nose pliers to remove the brake caliper bolts. Push up on the brake caliper.

e. Remove the old brake pads. Depress the spring plate to release the retaining pins and old brake pads.

2. Installing Brake Pads

a. Install the new brake pads into the brake caliper. Assemble the brake pads in the same configuration as the old ones. The friction material should be facing each other. Ensure that the top holes of each pad align with the retaining pin holes. Slide the new brake pads into the caliper to complete the installation.

b. Replace the brake pad retaining pins. Carefully bend the retaining pins to a 90° angle with needle-nose pliers to secure the brake caliper.

c. Reinstall the caliper. Position the caliper, aligning the mounting holes on the frame with the mounting points on the caliper. Insert the bolts with a hex wrench and tighten them evenly.

d. Before riding, reinstall the battery and test the brakes to ensure proper installation.

Brake Adjustment (Loose/Tight)

Tip: The best way to maintain brakes is to use both brakes simultaneously and engage the rear brake first to avoid excessive front wheel and fork tightening.

Brake adjustment includes:

· Check the wheels to ensure they are securely fastened in the frame dropouts. Improper wheel installation can cause the brake rotor to rub against the brake pads and create noise.

· Inspect the brake rotor for flatness and good condition. Damaged or dirty brake rotors can result in decreased braking performance or noise.

· Center the brake caliper by adjusting its positioning, bringing the inner pad (fixed part of the brake caliper) close to and parallel with the brake rotor. Incorrect brake pad or caliper positioning can lead to decreased braking performance or noise.

· Adjust the brake cable tension and check the brake lever. These final adjustments will help ensure properly adjusted brakes.

Crankset Replacement Guide

Prepare the bike for maintenance. Remove the battery and hold the power button for 10 seconds to discharge any remaining power.

1. Start by removing the left crank arm. Loosen the bolt with a hex wrench, then insert a crank puller tool to remove the crank arm.

2. Follow the same steps for the right-side crank arm, first remove the bolt with a hex wrench, then insert the crank puller tool into the opening.

3. Test the chain after installing the new crankset. The bike needs to be supported on a stand to elevate the rear wheel, and the crank must be rotated backward to rotate the rear wheel. Ensure the chain is properly connected to the chainrings.

PAS Sensor Replacement Guide

PAS Sensor Troubleshooting

1. Crank Removal (Refer to Crank Removal Guide)

a. Locate the PAS sensor behind the left pedal and check for any looseness.

b. If the PAS sensor is not loose, follow the cable from the PAS sensor to the connector.

c. Disconnect the PAS sensor connector and remove the controller.

d. Check for any loose connections between the controller and PAS sensor.

e.Inspect the connector for dirt, damage, or moisture. If there is dirt, damage, or moisture inside the connector, the sensor may need to be replaced.

2. PAS Sensor Replacement

a. Remove the old PAS sensor by disconnecting the cable from the main controller and loosening it.

3. PAS Sensor Installation

a. Install the new sensor, ensuring that the side with an arrow is facing towards the bike.

b. Reinstall the battery and perform a comprehensive test before riding.

Wiring Cable Troubleshooting

The wiring harness connects various electrical components on the bike. If the PUCKIPUPPY product supports indicating performing a wiring harness connector check, follow these steps to ensure the connectors are properly inserted and functioning.

Tools Needed: Hex wrench.

Prepare the bike for maintenance. Remove the battery and hold the power button for 10 seconds to discharge any remaining power. Flip the bike over and place it on the handlebars to prevent damage to the LCD display during maintenance.

1. Locate and remove the controller.

2. Check for loose connections in the wiring harness and reconnect them. When disconnecting the connectors, they must be pulled straight apart without twisting. If the interior looks normal, align the inner notch and pin and press them together directly without twisting.

3. Reinstall the controller following the above steps.

4. Reinstall the battery and perform a thorough test before riding.

Handlebar Grip and Stem Replacement Guide

Tools Needed: Pliers, hex wrench.

1. To remove the handlebars, start by loosening the handlebar clamp bolt.

2. Pry off the handlebar grip and slide it off the handlebars.
To remove the stem: Loosen the side bolts on the stem and then remove the center bolt from the stem. Then pull the stem off the fork.

Odometer Replacement Guide

Tools Needed: Hex wrench.

LCD Display Removal:

1. Prepare the bike for maintenance. Remove the battery and hold the power button for 10 seconds to discharge any remaining power.

2. Disconnect the LCD display connector. Follow the cable from the back of the LCD display to the wiring harness.

3. Pull apart both ends (without twisting) to disconnect the LCD display from the connecting cable.

4. Remove the LCD display. Use a hex wrench to loosen the bolts securing the LCD display, then pull it off the handlebars.

5. Remove the odometer controller. Loosen the clamping bolt with a hex wrench and remove it.

Brake Lever Replacement Guide

1. To remove the brake lever, first loosen the brake cable on the brake caliper.

2. Depress the control lever to expose the internal mechanism, then loosen the brake cable cover on the control lever.

3. Next, disconnect the cable from the brake caliper by pulling it, and loosen the bolt on the lever to remove it.

Brake Rotor Replacement Guide

1. Remove the wheel first, then remove the brake rotor (refer to the wheel replacement guide for assistance).

2. Use a hex wrench to remove the five bolts that secure the brake rotor to the wheel, then simply lift off the brake rotor.

Wheel and Fork Replacement Guide

Fork Removal:

1. Remove the bolt connecting the fork to the rear fork.

Front Wheel Removal:

(Operations similar to the initial installation of the wheel)

1. Flip the bicycle and stabilize it on the handlebars.

2. Use a wrench to loosen the two front wheel bolts on both sides. Locate and loosen the front wheel bolts, then remove them with a wrench.

3. Remove the front wheel. Lift the front wheel gently off the front fork.

Rear Wheel Removal:

1. Flip the bicycle upside down, remove the fork (as mentioned above), and then unscrew the bolt connecting the rear wheel.

2. Cut the tie wrap and disconnect the motor wires.

3. Remove the derailleur and lift the rear wheel. Separate the rear wheel by removing the brake rotor (refer to the brake rotor replacement guide).

Shifter Replacement Guide

1. To remove the shifter, cut off the end of the shifter cable and release it from the derailleur.

2. After removing the brake lever, throttle, and brake lever (refer to the brake lever, throttle, and brake lever replacement guide), unscrew the bolt from below the shifter, then slide it out and remove the shifter cable with the housing.

3. When installing a new shifter, insert the cable into the groove and push it in.

Taillight Replacement Guide

Cut the tie wrap to loosen the connection wires, then pull and remove it. Then unscrew the bolt at the back of the taillight to remove it.

Throttle Replacement Guide

1. To remove the throttle, the handlebar must be removed first (refer to the handlebar replacement guide).

2. Loosen the bolt and disconnect the wires connecting to the throttle. Pull down the throttle from the handlebar to remove it.

Derailleur Replacement Guide

1. Push the derailleur forward to release the chain from the crank.

2. Unscrew the outer chip from the derailleur and release the chain from the derailleur.

3. Unscrew the bolt of the derailleur's jockey wheel.

4. Unscrew the center bolt that connects the derailleur to the bicycle to remove it.

5. After removal, loosen the bolt that secures the derailleur cable and unscrew the derailleur cable from the derailleur.

Installation Guide:

1. When installing, first attach the derailleur to the bicycle.

2. Next, install the middle chip and thread the chain over it.

3. Install the outer chip, aligning the chain over it as shown.

4. Finally, insert the derailleur cable into the derailleur and tighten it.

Technical

Headlight Replacement GuideUnscrew the headlight bolt from the front fender and disconnect the wires to remove the headlight.

Headlight Replacement Guide

Unscrew the headlight bolt from the front fender and disconnect the wires to remove the headlight.

Derailleur Adjustment Guide

1. Prepare the bike for maintenance. Remove the battery and hold the power button for 10 seconds to discharge any remaining power.

2. Test the alignment. Rotate the pedals forward while shifting with one hand. When using the derailleur, ensure the chain smoothly moves to each gear. Test by rotating the wheel one or two full turns at a time.

a. The shifter cable tension may be too tight. Loosen the barrel adjuster on the derailleur. Rotate the barrel adjuster on the derailleur half or full turn to loosen it.

b. The derailleur cable may be too loose. Tighten the barrel adjuster on the derailleur. The derailleur barrel adjuster should rotate half to full turn.

3. Switch between all gears to test alignment. Rotate the crank forward with one hand while adjusting the gears. Ensure the derailleur smoothly moves the chain from 1st gear to 7th gear.

4. Reinstall the battery and perform a thorough test before riding.